Cyber Week Special Now thu Dec 6th! Spend $35 - Get Free Ground Shipping! Use Coupon Code 35FREESHIP

Magazine Extension Tube

$34.95$36.95

Magazine Extension Tube only.  Available in lengths +2 to +9.

Be sure to choose length and color.

This tube can be used on all of our MOA Magazine Upgrade Kits.
It fits on a variety of shotguns including Stoeger, Franchi Affinity, Browning New Model A-5, Benelli M2 and Breda B-12.

This is the tube only, kit sold separately.

Description

NOTE!!! If you already have an MOA Precision magazine extension on your shotgun, you can change lengths by simply buying another tube and spring. The end cap and adapter nut are completely interchangeable!

How to choose extension length –
This information is for the Stoeger M3000/ M3K and P3000 only.
Extensions fit M3500, but stated capacity and length will be different due to the 3-1/2″ chambering.

A +2 extension is shorter than all factory barrels including the 18-1/2″ defense model. Capacity is 6+1.
NEW!!! The DEFENSE extension tube is flush with the 18-1/2″ barrel. Capacity is 6+1 or 7+1 depending on shell length
A +3 extension is about 1-3/4″ longer than a defense model barrel, and gives a capacity of 7+1
A +4 extension is about 2″ shorter than a 24″ barrel, and gives a capacity of 8+1.
A +5 extension is about 3/8″ longer than a 24″ barrel, and gives a capacity of 9+1.
A +6 extension is about 7/8″ longer than a 26″ barrel, and gives a capacity of 10+1.
A +7 extension is about 1-1/2″ longer than a 28″ barrel, and gives a capacity of 11+1.
A +8 extension will give an overall magazine length of approx 31-1/2″ from the front of the receiver, and gives a capacity of 12+1
A +9 extension will give an overall magazine length of approx 34″ from the front of the receiver, and gives a capacity of 13+1

IMPORTANT!!!!!
If your shotgun has an orange plastic follower, there is a very good chance that it will not function with an extended magazine.
It is too short, and the corner is sharp so it will hang up where the tubes meet.
We highly recommend replacing it with our low-drag follower for reliability. The longer black anodized factory follower works fine with extensions.

 

Additional information

Length

+2, DEFENSE, +3, +4, +5, +6, +7, +8, +9

Color

Black, Red, Blue

Reviews

There are no reviews yet.

Be the first to review “Magazine Extension Tube”