MOA Precision/ ISMI Trigger Improvement Spring Kit

We have worked together with ISMI (one of the premier gunspring manufacturers in the US) to produce our own custom wound trigger and hammer springs. Reduced power trigger and hammer springs significantly drop the trigger pull weight on Stoeger M3000, M3k, M3500, and M3020 without gunsmithing! Drop-in fit can reduce heavy factory pull weight by up to 3 lbs.
Includes-
1) reduced power trigger spring and
1) reduced power hammer spring

Also fits Franchi Affinty series, Benelli M-series, Breda B12 series, Remington Versa-Max, and most other shotguns with a Benelli-based trigger group design.
NOTE- THERE IS NO FIRING PIN SPRING IN THIS KIT, AND THERE IS NO NEED TO DISASSEMBLE YOUR BOLT! Some various youtube videos show replacement of the firing pin spring, but this spring has no effect whatsoever on the trigger pull. Both replacement springs go in the trigger group- one under the front of the trigger, and the other goes under the hammer spring cap. The total process takes under 10 minutes if you are familiar with the mechanism. If you are not, we recommend gunsmith installation to ensure safe and proper function.